Shimge Water Pump BWI 1-6

Shimge Water Pump BWI 1-6 Overview

Shimge Water Pump BWI 1-6 shall comply with the enterprise standard of Q/SG 504 light stainless steel multistage centrifugal pump. This series of products conforms to GB/T17219 "Safety Evaluation of Drinking Water Distribution Equipment and Protective Materials". This product has the characteristics of high efficiency, low noise, and stable operation. The pump is a non-self-priming multi-stage horizontal structure, which is compact, simple to install, and convenient to use and maintain.

Working Condition

1.Medium temperature: normal type:0°C~68°C, hot water type:68°C~120°C; 2.Ambient temperature:+40°C;
3. Maximum system working pressure: 1.0MPa;
4. The maximum inlet pressure is limited by the maximum system operating pressure;

5. When the density of the conveying medium is greater than that of water, it is necessary to consider using a motor with higher power;
6. The power supply frequency is 50Hz AC, the voltage is 220V AC in single phase and 220V/380V AC in three phases, and the voltage fluctuation range is 0.9~1.1 times of the rated value. Please indicate the special frequency and voltage when ordering.

Application Limits

• Thin, clean, non-combustible, and non-explosive liquid containing no solid particle or fiber
• Applicable to deliver tap water, alkaline mineral water, softened water or mildly corrosive medium
• The use of a large-power motor must be considered when the density or viscosity of the medium delivered is higher than that of water
• Medium temperature: 0˚C - 68˚C for normal temperature type; 0˚C - 120˚C for thot water type
• Ambient temperature: -15˚C - +40˚C; maximum operating pressure: 1.0MPa

Performance Data

• Rated Flow (m3/h): 1
• Flow Range (m3/h): 0.4 - 2.4
• Maximum Pressure (bar): 5.1
• Motor Power (kW): 0.25 - 0.37
• Maximum Efficiency (%): 28
• Temperature Range: 0˚C - 68˚C for normal temperature type; 0˚C - 120˚C for thot water type
• Inlet: G1
• Outlet: G1